Renzorato RZ1

Overview

The RZ1 is a flexible, silent, and powerful cleaning machine. The RZ1 is the optimal cleaning machine for milling pipes in the dimensions 40 to 125 mm (1.5′′-6′′), where you also can clean with the machine in 3 ways:

1. Along with the reel SW-10
Choose between 15M(50ft), 8mm (1/3in) Light Shaft or 12M(40ft), 10mm (3/8in) Flex shaft.

2. Along with the reel SW-20 20M(65ft), 10mm (3/8in) Flex Shaft.

3. Motor package Stand-alone, with up to 20M (65ft) loose working shaft.
The perfect option if you are going up through attics or onto roofs. Just grab the motor package to have both the safety and power of the RZ1 with you anywhere instead of a driller machine.
The separation between the motor package and the reels is easily done by removing the RZ1-link from the connection on the motor package and then pressing down the locking button in the middle and simply lift the machine away from the reel. The separation takes less than 20 seconds.

The radio control offers a full view of speed and torque, where you can easily change these values during cleaning to get the most efficient milling for both the pipe and the operator. Adjust the speed by 100rpm at a time and the Torque by 20%.